Changing Catalyst emitter

[Ander]

Ok, here we go.
This here is a full album of the Cata emitter from both sides, with and without lens:
https://picasaweb.google.com/101858129259810209234/BladeHolderType10?authuser=0&authkey=Gv1sRgCMSytfTtxsuzNQ&feat=directlink
This last photo shows the situation very well:
https://picasaweb.google.com/lh/photo/1c0N8Hhjz-bm0HDDp4mQyGanhOHgcswt7Fknl-WJ940?feat=directlink
It seems to me that there would be no rest for the lens if I were to use either type 7 or type 10 from TCSS, which, as shown in the picture above, have a much larger inner diameter.
Am I missing something, or do I need something else here? Please help this total noob

[Kham-Ryn Kurios]

Points to Ander for the great pictures.

These show a great look at the inside of the emitter.


 

[Shami Pemas]

you could buy a lens from TCSS to use if you want to switch emitters. It wouldn't be a focusing cone like Ultra uses, but it works nonetheless.

[Ander]

In the end I found out that yes, you can use a TCSS emitter in the Catalyst, provided that you use a TCSS heatsink adapter AND you also need to cut about 3 mm of the threaded part, because it's longer than US's, and you end up with the cone pushing on the led if you don't, which is bad. I am now back to the original emitter.